Previous Page
Next Page
Testing Index On-Line Catalog
Catalog - Page 66
•    Fully automated precise testing for high volume applications at the touch of a button
•    Load test units up to 4.5kW
•    Automatic electrical connections and unit clamping
•    Quick-change tooling and fixtures
•    Measurers more than 40 different starter parameters including free spin current and speed, solenoid current, contact voltage drop, and “R” terminal function
•    User configurable Pass and Fail reports and labels with performance curve plotting torque, power, speed, and voltage
•    Computer controlled 1600 Amp programmable starter power supply with less than 100mV ripple, simulating 200 - 2000 CCA battery (0-30 milliohms)
•    Computer controlled 150 Amp programmable solenoid power supply, solenoid pull-in can be tested at a programmable reduced voltage during the test to insure operation under worst-case conditions
•    Computer controlled programmable load with stall test function
•    Simulates engine starting and tests starter, solenoid, drive,and spring engage and disengage timing,  this can reveal faulty components or assembly errors
•    Built-in oscilloscope, precise waveform analysis which can detect armature and commutator problems
•    Energy generated by the load test is recuperated by the starter power supply
•    Can scan a full performance curve in less than 15 seconds which increases the accuracy by decreasing test result variation caused by temperature change
•    Supplied with flat touch screen color LCD monitor
•    Available in many working voltages:  (220 to 480V @ 50/60Hz)
•    Programmable test cycle time as fast as 15 seconds
•    Simulate engine firing with up to 10,000 RPM on the starter
•    Endurance test and Calibration modes
•    Test data logging with graphical display of test cycle for analysis

Starter current:  0-1600 Amps, 0.15%
Starter voltage:  0-40 Volts. 0.15%
Starter speed:  0-10,000 RPM, 1%
Starter torque:  0-60 NM
Solenoid current:   0-150 Amps, 0.2%
Contact voltage drop:  0-2.5 Volts, 0.2%
Starter efficiency:  0-100%
Starter output power:  0-4.5 kW, 0.5%
Starter input power: 0-20 kW, 0.5%

Previous Page Next Page
Testing Index On-Line Catalog
Catalog - Page 66