Previous Page
Next Page
Cleaning Index On-Line Catalog
VENSEL ENTERPRISES
1-800-662-6099
Catalog - Page 157
SMALL PARTS TUMBLERS

Not all parts clean best in large cleaning systems, especially insulators, regulators, rectifiers and some hardware.  Many times all you want to do is brighten parts without steel shot or glass bead blasting them.
 Small rotary tumblers and vibrators are your answer. 

Media and compounds will vary per application, see media and compound section of catalog
C056-0004-TL
C056-0002-B

C056-0002-B
2 BAR ROTARY TUMBLER BASE

•    Not supplied with rotary tumbler barrels, see below
•    Requires C056-0004-TL 2.5 Gallon Barrel or C056-0006-TL  8 Gallon Barrel

Power:  110 Volt, 60 Hz
Barrel Specifications:
Part Number
C056-0004-TL C056-0006-TL
Total capacity
2.5 gallons
8 gallons
Net weight
4 lbs.
9 lbs.
Dimensions
10 1/2” x 10 3/4” 15 3/4” x 14 3/4”
Barrel opening 
4” 7 1/4”
Barrel RPM’s
Low  
38        25
High
53        40
# Barrels to fit
C056-0002-B Base 
2 1
Barrels:  are molded from heavy duty plastic
Covers:  are stainless steel with neoprene expansion plugs








S109-7400
S109-7400
METAL BLASTER
On a scale of 1 to 10, the S109-7400 Metal Blaster is rated a 10 over buffing wheels. 

Features:
•    Perfect for tear down
•    Use while the unit is still assembled
•    No down pressure required, side to side motion gives the best results
•    No grinding
•    No fumes
•    No brush gum up
•    No heat creation which can cause loss of hardness
•    Removes heavy road grease buildup, thick paint and heavy rust
•    Works in tight places
•    Removes powder coating
•    Does not attack or destroy the subsurface
•    Works great on exposed threads
•    Belts are sharpened by running in the reverse direction, also polishes in reverse

Air pressure:        90 psi
Air consumption:        4 CFM free speed
Free speed:        3500 RPM
Sound level:        85 dBa
Air inlet thread size:        1/4” - 18NPT
Required inlet hose size ID:    3/8”
Overall length:        12”
Weight:            2.4 lbs.
Supplied with steel belt adapter

Belts Sold Separately
Coarse
Medium
Fine
ABRASIVE BELTS FOR S109-7400 METAL BLASTER
Part Number Abrasive Removes Finish
S109-7405 Coarse thick undercoating,
urethane lining
Coarse
sandblasting
S109-7406
Medium thick paint
heavy rust
Fine
sandblasting
S109-7407 Fine paint
light rust
non sandblasted finish
S109-7411 4 Piece Kit - contains one of each belt and 2 vinyl seam zapper
•    Abrasive steel belt width:  0.866”, 22MM
•    We recommend S109-7406 Abrasive Steel Belt to Start
•    Stainless Steel Belts available
Previous Page Next Page
Cleaning Index On-Line Catalog
VENSEL ENTERPRISES
1-800-662-6099
Catalog - Page 157