Catalog - Page 180
The D306-0001-PB Blaster is ideally suited for small abrasive blasting jobs at home or in the shop. Simply fill with abrasive, attach to your air supply hose and begin blasting. Removes paint and rust from metal surfaces. Clean irregular surfaces that are difficult to clean with wire brushes or sandpaper. Return aluminum pieces to their new, bright stain finishes. Prepare surfaces for repainting or coating. The compact design provides ease of use in hard to access areas. Designed for outdoor useage.
• Sand Reservoirs - 4 lb. capacity
• Cast Aluminum Gun
• Patent pending Nozzle/Air Jet combination - Most Efficient Available
• Flat Bottom for Convenient Upright Storage and Sand Fill
• 70-100 PSI Operating Pressure Range
• Minimum of 3 HP Compressor required
• Dust Collector not included, a 5 Gallon Wet/Dry Shop Vac is
Always wear eye, face, and hand protection when operating. Failure to wear
protection may subject user to abrasive being blasted on skin or eyes which may cause injury.
Glass Bead Cleaning & Finishing Cabinet
The D306-0019-DB has a large, convenient top opening and is a sturdy welded steel cabinet. It is a self-contained unit operating on 115V alternating current and connects into your present air supply. It will accept and recirculate most popular blast media. The unit is equipped with an internal blasting gun that controls the air flow. (Carbide nozzles are available.) One exhaust bag is used for dust collection.
This cabinet is the practical answer to automotive rebuilders, mold cleaners, and many industrial applications where quality finishing and cleaning is needed at a fraction of the conventional time required. This cabinet is durable, highly efficient and inexpensive.
Overall height: 24”
Exterior width: 19”
Top opening: 17 1/2 x 13”
Exhaust fan r.p.m.: 2870
Exhaust bag: 13 x 42 1/2”
Air requirement: 5 HP air compressor, 70-100 psi, Approx. 15 c.f.m.
Nozzle size: 5/16” ID
Shipping weight: 57 lbs.
Table Top Composite Abrasive Blast Cabinet
• Large 30” x 20” Cabinet
• Professional Trigger Operated Blast Gun
• Fluorescent lighting
• HDPE construction for long life-will not rust or peel
• Full View Lid/Window
Work Area Dimensions: 16 1/2” H Back, 13”H Front x 19 1/2”D x 29 1/2”W
Overall Dimensions: 27” H Back, 21” H Front x 30” W x 20”D
Electrical: 110V, 60Hz 1PH, (optional 220V)
Air Requirement: 70-100psi, 5.5 CFM standard, (15 CFM optional)
The D306-3030-DBC comes fully assembled and ready to use. Customer must supply blasting media (sand, glass bead, etc.), compressed air, 110V electrical connection and dust collection system. Most shop vacuums with 1-1/3” cuff will hook up to this cabinet, i.e. Sears 5 Gallon Wet/Dry Vac 3 HP.
Catalog - Page 180