Previous Page
Next Page
Lathe Index On-Line Catalog
VENSEL ENTERPRISES
1-800-662-6099
Catalog - Page 199
M507-0001-LAC
The fastest way to polish shafts, slip rings and commutators.

M507-LA1C  Speed Lathe, Bench Model, Hand Operated, Single Speed
M507-LA2C  Speed Lahthe, Bench Model, Hand Operated, Dual Speed

Features:
•    Hand operated lever controls for collet operation.
•    A separate control is provided for the motor and brake control which allows the loading unloading of the lathe without stopping the spindle.
•    The standard arrangement includes a type 5C collet in sizes up to 1-1/16 for round stock, 3/4” for square and 7/8” for hexagon stock.
•    As an optional feature the M507-LA2 series can be equipped with a 5CX collet with a maximum 1 1/2” capacity, and the spindle bore can be increased for 1-3/8” pass-thru.
•    Standard spindle bore is 3/4” for the M507-LA1 and 1” for the M507-LA2 series.


M507-LA1D  Speed Lathe, Bench Model, Hand Operated, Single Speed
M507-LA2D  Speed Lathe, Bench Model, Hand Operated, Dual Speed

These two speed lathes have the same characteristics and the M507-LA1C & M507-LA2C, with the major exception that the collet mechanism is foot controlled.  The motor and brake are still hand controlled, but can be altered to operate by a foot treadle.


M507-LA1E  Speed Lathe, Bench Model, Foot Operated, Single Speed
M507-LA2E  Speed Lathe, Bench Model, Foot Operated, Dual Speed

These model speed lathes are entirely foot controlled.  The foot treadle operates the collet mechanism, brake and motor controls, thus leaving both of the operators hands free for performing the work. 

Operation Sequence:
1    The operator inserts the work part into the collet and depresses the foot treadle. 
2    This will cause the collet to close, the brake will be released and the motor starts.
3    In the reverse, the brake will stop the motor before the collet opens.

Features:
•    The spindle is hollow having 3/4” clear hole in the M507-LA1E and a 7/8” clear hole in the M507-LA2E.
•    The standard collet is type 5C, stepped 1 1/2” deep for round up to 1-1/8”
•    Optional type 6CT collet in all sizes up to 1-3/8” capacity for round stock.
•    The option of air operation of the collet mechanism is possible and quoted upon request.

Ordering Information Required:

Please specify:
  1. Single or Double Speed
  2. 220V or 440V
  3. RPM
SpecificationsC
SpecificationsE
Previous Page Next Page
Lathe Index On-Line Catalog
VENSEL ENTERPRISES
1-800-662-6099
Catalog - Page 199