| Previous Page |
Next Page |
| Lathe Index | On-Line
Catalog |
1-800-662-6099
Catalog - Page 205
 |
 |
| Front
of Tailstock Spindle |
Tailstock
Spindle Shaft Side View |
Measure the I.D. at the lip of the opening of the tail stock spindle shaft
Step 2:
Use measurement to determine morse taper according to chart below:
1MT = .4
2MT = .7
3MT = .9
4MT = 1.2”
5MT = 1.7”
Step 3:
For morse tapers larger than 2MT order sleeve below:
H107-0023-E Adaptor sleeve from 2MT to 3MT
H107-0024-E Adaptor sleeve from 2MT to 4MT
H107-0025-E Adpator sleeve from 2MT to 5MT
F107-3145-011 Tail Stock with #1 Morse Taper
F107-3145-012 Tail Stock with #2 Morse Taper
F107-3145-013 Tail Stock with #3 Morse Taper
• High speed steel
F107-3145-021 Tail Stock with #1 Morse Taper
F107-3145-022 Tail Stock with #2 Morse Taper
F107-3145-023 Tail Stock with #3 Morse Taper
• High speed steel
• Made in the USA
• Live center with fixed point
| Part Number | Accuracy | Thrust Load | Taper |
| R107-0822 (substitute F107-3145-022) |
+/- .0001 | 390 lbs | 2MT |
| R107-0102
|
+/- .0001 | 2,360 lbs | 2MT |
| R107-0823 |
+/-
.0001 |
390 lbs | 3MT |
| R107-0103 | +/- .0001 | 3,900 lbs | 3MT |
| R107-0824 | +/- .0001 |
790 lbs | 4MT |
| R107-0104 | +/- .0001 | 4,050 lbs | 4MT |
| Previous Page | Next Page |
| Lathe Index | On-Line Catalog |
1-800-662-6099
Catalog - Page 205