Previous Page
Next Page
Tools Index On-Line Catalog
VENSEL ENTERPRISES
1-800-662-6099
Catalog - Page 237
How to Prevent Premature Tool Failures: 
Lubricate All Threads with S109-1470 Anti-Sieze, P209-G4700 Gear Grease & P209-0321 Spray Lubricant
Burnishing


BURNISHING BALLS

•    Precision ground, hardened balls
•    Used to press open end bushings, like starter drives, drive end housing & 40MT center housings
•    This process re-sizes the bushing to the housing, insuring consistant tolerances

Call for quote
R108-0375-R
ROLL-A-FINISH

The Roll-A-Finish Tool cold works metal by roller burnishing. 
Tapered rolls, rotating around and bearing on an inversely tapered mandrel, apply steady rolling pressure against the work surface...flowing the high peaks into microscopic valleys...accurately sizing...fine finishing and work hardening the part surfaces.

Re-size and straighten bushing ID & OD


PART NUMBER DIAMETER RANGE
Thru Hole 3 Degree Helix Inches Millimeters
R108-0375-R .371-.392
9.42-9.96
R108-0391-R .387-.408 9.83-10.36
R108-0406-R
.402-.423 10.21-10.74
R108-0422-R .418-.439
10.62-11.15
R108-0438-R .434-.455 11.02-11.56
R108-0453-R .449-.470 11.40-11.94
R108-0469-R .465-.486 11.81-12.34
R108-0484-R .480-.501 12.19-12.73
R108-0500-R .496-.537
12.60-13.64
R108-0531-R .527-.568 13.39-14.43
R108-0562-R .558-.599 14.17-15.21
 
Previous Page Next Page
Tools Index On-Line Catalog
VENSEL ENTERPRISES
1-800-662-6099
Catalog - Page 237