Previous Page
Next Page
Tools Index On-Line Catalog
VENSEL ENTERPRISES
1-800-662-6099
Catalog - Page 261
H308-2600-SRE In Hsg
H308-2600 cut
H308-2600-SRE
CUTTER FOR LEECE NEVILLE
SRE NEEDLE BEARING HOUSINGS

This tool will allow you to remove the lip
on the inside of the SRE housing that covers the needle bearing and prevents you from easy access.  The center of the bearing you are trying to remove must be usable as it is the centering device for the tool.  We recommend replacing the bearing with a bearing with a seal built in.

Features:
•    Make a more professional looking job
•    Save time by making the bearing removal fast and easy

Operation:
1    Install the cutting tool into the usable needle bearing in the SRE end frame
2    Using a drill press, center the tool into the chuck and tighten the chuck.  Clamp the housing into place
3    Set the drill press on a slow speed and slowly feed the cutting bit into the lip.  Stop the tools downward motion as soon as you see no more aluminum being cut.
A158-2500
A158-2500
LEECE NEVILLE SRE BEARING EXTRACTOR

•    This tool removes those aggravating needle bearings in seconds
•    Use with an arbor press only
•    Will not damage sea area

Operation:
1    Set housing in fixture
2    Insert push out tool in bearing
3    Tool cut two slots in grease shield
4    Push out bearing
H108-0107-T
H108-0107-T
SHEAR PUNCH

•    To remove stop shoulder
•    Application:  Leece neville SRE frame
K108-0001
K108-0001withbrushholder

K108-0001

LEECE NEVILLE ALTERNATOR BRUSH LOADING TOOL

Applications: J, JB, C, LC & RJ Series

Operation:
1    Mount the brush holder on the assembled alternator
2    Install the brushes into the locating block
3    Press the brushes into the locating block with the brush locator
4    Inset a straighten paper clip into the brush pin hole
5    Remove brush installing tool and brush locator
6    Install the regulator and remove the paper clip
Previous Page Next Page
Tools Index On-Line Catalog
VENSEL ENTERPRISES
1-800-662-6099
Catalog - Page 261